|
|
|
|
|
|
SPREADERS
|
|
We offer the full range of Boschung / Kuepper Weisser speaders - suitable for trucks, Unimog, tractors, skip loaders and towable as well. Boschung technology guarantees efficient and cost-effective winter maintenance.
|
|
Spreader IMS E
|
|
|
|
The spreader IMS E is the perfect spreader for all truck series. Its outfitted with latest IMS (Intelligent Mobile Spreading) technology.
User-friendly and reliable, the IMS E ensures perfect symmetric spreading patterns at all times. Adequate stand-systems simplifys the disposal.
Technical data:
Hopper capacity 2,7 m³ to 10,0 m³
Brine tank: up to 3440 l
Spreading width 2 to 8 m or 3 to 12 m
Spiral auger with programmable spreading-levels.
Spreader IMS B
This spreader is the same as the IMS E, but with an integrated belt cassette. The belt guarantees a secure salt conveyance at any filling- level of the hopper. Effective spreading of wet salt is also possible with the IMS B.
Technical data:
Hopper capacity 2,7 m³ to 10,0 m³
Brine tank from 1720 to 3440 l
Spreading width 2 to 8 m or 3 to 12 m
Conveyor belt with programmable spreading-levels.
|
|
Spreader IMS F
|
|
|
|
Flat Bed spreader
The IMS F characterizes through its extremely flat design and is therefore predestined for all truck series and Unimogs.The hopper design with its vertical front and rear panels is specially adapted for being used with only one spiral auger.
Technical data:
Hopper capacity 2, m³ to 4,0 m³
Brine tanks from 860 to 1720 l
Spreading width 2 to 8 m or 3 to 12 m
Spiral auger with programmable spreading-levels.
|
|
Spreader IMS J
|
|
|
|
Flat bed spreader for small multi-purpose carrier
The small flat bed spreaderIMS J has been designed for small trucks, narrow-gauge vehicles, multi-purpose carriers and Unimogs.
The flat construction allows perfect hand- ling and an excellent rear-view.
Technical data:
Hopper capacity 1, m³ to 2,0 m³
Brine tanks from 560 to 700 l
Spreading width 1 to 6 m or 2 to 8 m
Open auger with programmable spreading-levels
|
|
Light weight spreader IMS W
|
|
|
|
Light weight spreader IMS W
The light-weight IMS W fits small trucks, narrow-gauge vehicles, small multi-purpose carriers, Unimogs and forklifts and can in addition be mounted on the Küpper-Weisser trailer with self-drive.
Technical data:
Hopper capacity 0,5, m³ to 2,3 m³
Brine tanks from 260 to 860 l
Spreading width 1 to 6 m or 2 to 8 m
Open auger with programmable spreading-levels.
|
|
3-point attachment spreader
|
|
|
|
3-point attachment spreader
The IMS P is the spreader for any tractor with a 3-point attachment.The hopper design allows full integration of a wet salt device. Regulated drives and road-connected spreading turn the IMS P into a complete urban spreader.
Technical data:
Hopper capacity 1, m³ to 2,0 m³
Brine tanks from 550 to 775 l
Spreading width 1 to 6 m or 2 to 8 m
Counter rotating spiral auger with programmable spreading-levels.
|
|
Spreader for dumpster trucks
|
|
|
|
The preader for dumpster trucks STA AK
The dumpster truck STA AK is suited for fast load and un- load during winter service.The pick-up pads of the chains are normated and need no separate adjustment.
Technical data:
Hopper capacity 3, m³ to 6,0 m³
Brine tanks 1480 l
Spreading width 2 to 8 m or 3 to 12 m
Spiral auger with programmable spreading-levels.
|
|
Trailer spreader
|
|
|
|
The trailer spreader IMS trailer is available in an IMS E version with an auger or in an IMS B version with a belt. The IMS trailer has been designed for flexible winter maintenance. It’s highly economical and reliable.
The tool-free level adjustment of the towing bar enables the use of various towing units.
Technical data:
Hopper capacity 2,7, m³ до 4,0 m³
Brine tanks 1720 l or 2240 l
Spreading width 2 to 8 m or 3 to 12 m
Spiral auger or conveyor belt with programmable spreading-levels.
|
|
Trailer spreader JUNIOR
|
|
|
|
The trailer spreaderJUNIOR is ideally suitable for use on urban and village streets, footpaths, car parks and industrial areas.
The single-axle trailer with a towing eye for spreading salt and/or grit can be operated by any standard small vehicle: power is supplied via the hub to the axial piston pump and is dependent on the distance travelled.
The one-piece steel container is equipped with a spiral auger conveyor to distribute the grit.
Technical data:
Volume: about 0,9 m.
Plate - Ø: - 400 mm
Weight capacity: 635 kg
Total weight (on axle): 1 800 kg
|
|
|
| |
|
|
 ToTop |
 Back
|  Home
 Print
|
